top of page

Perfect for cleaning oxidise stains on lead..

If you are soft washing with sodium hypochlorite occasionally you will apply the soft wash recipe on to an area of the roof where there is lead flashing.


Sodium hypochlorite will react with the lead flashing and cause a brown stain. This can be avoided by wetting the lead with water first and then if the sodium hypochlorite comes in contact with the lead rinse it off with water immediately.

If however for what ever reason you aren't able to prevent the soft wash reacting with the lead then you would use Lead X Pro to remove the brown stain.

It can also be used to clean up lead that has aged over time.


Please see instructions on how to apply below.


Application method by spray or brush

Apply at a rate of 1 litre of product

per 4m2 to 5m2 of surface area

Spray or brush product on surface. Stains should

disappear. Repeat if necessary.

Rinse with water after stain disappears.

Do not use on glass.



Always Consider if appropriate for the

surface you are cleaning.

Always use the correct Personal Protective Equipment

(PPE) including gloves, mask and eye protec

Lead X Pro Ready To Use Lead Stain Remover

    bottom of page