Designed for Lean Manufacturing work cells
The Indexing Turntable Part Washer is a compact Aqueous Spray cleaning machine designed for one piece at a time part washing. Parts are loaded by robot or by hand onto a rotating fixture which indexes on a timed cycle from three seconds and up. Parts index into high pressure spray zones which remove machining chips and oils while cleaning out small holes and passages. The parts are indexed through a spray wash which uses aqueous chemistry or coolant. After spray washing the parts index, either to a spray rinse stage or directly to a high pressure self contained blow off station.
The Turntable Spray Washer uses a precision indexer to precisly locate parts for loading by a robot pick and place unit or by hand. The index cycle is adjustable from three seconds on up to meet the required production.
Small compact cellular design
Wash and rinse solution tanks are located below the cleaning chamber. During the cleaning cycle the solution is pumped through micron filters, delivered through High Impact Spray Jets and recirculated on a continual basis into the cleaning chamber. The parts are continually sprayed with fresh filtered solution insuring even the most complex parts with internal passagesand deep blind holes are thoroughly cleaned. The continual separation and removal of chips, soils and oil ensures a longer bath life.
Robotic or Hand load and unload
- Adjustable indexing speeds from three seconds
- Quick change over for different parts
- Adjustable spray positions
- Cycles for: Wash-Rinse-Rust Prevent-Dry
- Energy efficient drying
- Stainless steel construction
- Continuous oil removal
- Micron filtration for precision cleaning
| Specifications |
| TT model high impingement spray |
| RB model immersion with submerged spray jets |
| Heavy gauge stainless steel construction |
| Stainless steel pumps |
| 140° stainless steel solution heater |
| Stainless steel spray piping |
| 480 volts p3 phase |
| Lift out stainless steel chip basket |
| Solution level control |
| Nema 12 control panel |
| Programmable logic control |
| Interlocked cover |
| E-stop button |
| 24 volt control system |
| Use with: aqueous and semi-aqueous cleaners, or machining coolants |
| Floor space is determined by the number of tanks required |
| Wash and Blow Off 3' x 4' |
| Wash-Rinse-Blow Off 3' x 5' |
FLEX CELL 360 Top Loading Cabinet Washer
Model FC-TT ROTATING TURNTABLE SPRAY WASHER
- Flushes away all oils and chips as parts rotate
- Spray wash from all sides by high pressure nozzles
- Ideal for spray cleaning large machined parts
- Safety interlocks
| Specifications |
| Heavy gauge stainless steel construction |
| 480 volts 3 phase |
| Lift out stainless steel chip basket |
| Solution level control |
| Nema 12 control panel |
| Programmable logic control |
| Interlocked cover |
| 24 volt control system |
| Use with: aqueous and semi-aqueous cleaners, or machining coolants. |